Stainless steel tension spring

A branded online store

under Lanqiaoying Technology




Your current location : Home >> News >> Technical Information

Come to understand how to do line bending in the processing of stainless steel products?

2020-07-25 09:04:19

Nowadays, most metal processing factories can process stainless steel lines. We also use stainless steel lines when we decorate our homes. But what about the processing of metal lines?

First of all, the stainless steel metal line is mainly a bending process. From this process, you can see how the manufacturer's strength is.

Generally speaking, there are two types of bending. One is round wire bending. Because the steel wire inside the stainless steel will rebound, this is also a test for manufacturers. The stainless steel itself cannot be damaged while bending, so after receiving the finished product At the time, you can see the strength from the works of the manufacturer.

There is also grooving and bending, which is relatively simple, but with the addition of a grooving process, it will take longer. However, the stainless steel after bending has sharp edges and corners, which is more suitable for ceilings, skirting lines, edging, etc. Location.

Round wire bending is generally carried out by hydraulic press. According to the type and thickness of stainless steel, the corresponding tonnage is set for bending and extrusion. Grooving bending is mainly to cut a few millimeters at the corner, and then use The bending machine performs extrusion to meet the requirements.

Stainless steel manufacturing and processing

Recently Viewed: