The hot-melt copper nut machine adopts electric heating, stable movement and precise control. The heat is transferred to the plastic part through the hot-melt head, and the hot-pressing deformation achieves the desired effect. This equipment adopts a plate-drawing structure, and the heat of the heating plate is transferred to the welding surface of the upper and lower plastic heating parts by the electric heating method. The surface is melted, and then the heating plate is quickly withdrawn, and the upper and lower heating elements are heated and the melting surfaces are fused, solidified, and integrated.

    1. Features of hot melt copper nut machine

    1. With electronic slow motion and electronic limit, it is suitable for embedding, riveting and other hot melt methods.

    2. The combination of hydraulic buffer and buffer circuit makes the operation very stable.

    3. The nut melting machine is suitable for the processing of large-scale objects and the simultaneous welding of multiple points.

    4. Using multi-section heating tube and imported temperature control system, the temperature control is accurate and reliable.

5. The hot melt copper nut machine adopts various surface treatments such as electrostatic spraying and hard chrome plating, which is beautiful in appearance and durable.

Second, the advantages of nut hot melt machine

    1. The automatic nut hot-melt machine has fast production efficiency and quick conversion to production. This machine only needs to be debugged once and it is very fast whenever it is converted. Just put in the corresponding jig and adjust the position of the screw column and the depth of the nut implantation, and it can be used.

    2. The implanted nut of this machine is controlled by point position, no matter what kind of product, as long as all the operation modes within the machine's operating range of 80mm height can be completed by the operator (specially trained).

    3. This machine comes with six small manipulators. As long as the nuts used are the same, six nuts can be implanted on the same workbench to produce products at one time.

    4. Only one lower mold fixture is needed for each product processing, thereby reducing fixture costs.